MultiCam Boards Documentation > MultiCam Documentation > MultiCam Reference > Channel Class > Trigger Control Category > Expert Level (Trigger Control) > TrigLine

TrigLine

Picolo Picolo Junior 4 Picolo Pro 2 Picolo Pro 3 Picolo Tetra Picolo Tymo Picolo Alert Picolo Diligent

Description

Type

Enumerated

Description

Designation of trigger hardware line from outside system

"Set" effect

Sets the trigger hardware line

"Get" effect

Returns the currently selected trigger hardware line

Classification

Class

Channel

Category

Trigger Control

Level

Expert

Identifiers

String

TrigLine

C, C++

MC_TrigLine

.NET

MC.TrigLine

Numerical

666

It designates the hardware line sensed by the channel and aimed at generating the trigger event.

The hardware line is only involved when TrigMode or NextTrigMode is HARD or COMBINED.

The selection of the electrical style of the hardware line, by means of parameter TrigCtl, is a prerequisite.

Values applicable to Domino Iota, Domino Alpha 2

Name

Identifier

Description

NOM

MC_TrigLine_NOM

The channel trigger line is found on the TR-ST connector at the nominal terminal (TRX/pin 6) or TRY/pin 7.

Values applicable to Domino Melody

Name

Identifier

Description

NOM

MC_TrigLine_NOM

The channel trigger line is found on the System connector at the nominal terminal pin, according to the TrigCtl value.

When TrigCtl=LVDS, the relevant trigger line is the differential input pair TR/pins 1 and 2.

When TrigCtl=TTL, the relevant trigger line is Enhanced IO1/pin 3.

IO1

MC_TrigLine_IO1

The channel trigger line is found on the System connector at the Enhanced IO1/pin 3terminal. This value is applicable only when TrigCtl=TTL.

IO2

MC_TrigLine_IO2

The channel trigger line is found on the System connector at the Enhanced IO2/pin 4 terminal. This value is applicable only when TrigCtl=TTL.

TR

MC_TrigLine_TR

The channel trigger line is found on the System connector at the differential input pair TRX/pins 1 and 2 terminals. This value is applicable only when TrigCtl=LVDS.

Values applicable to Domino Harmony

Name

Identifier

Description

NOM

MC_TrigLine_NOM

The channel trigger line is found on the System connector at the nominal terminal pin, according to the TrigCtl value.

When TrigCtl=LVDS, the relevant trigger line is the differential input pair TRX/pins 6 and 11 or TRY/pins 7 and 12, according to the camera connector feeding the channel.

When TrigCtl=TTL, the relevant trigger line is Enhanced IO1/pin 1 or Enhanced IO3/pin 3, according to the camera connector feeding the channel.

IO1

MC_TrigLine_IO1

The channel trigger line is found on the System connector at the Enhanced IO1/pin 1 terminal. This value is applicable only when TrigCtl=TTL.

IO2

MC_TrigLine_IO2

The channel trigger line is found on the System connector at the Enhanced IO2/pin 2 terminal. This value is applicable only when TrigCtl=TTL.

IO3

MC_TrigLine_IO3

The channel trigger line is found on the System connector at the Enhanced IO3/pin 3 terminal. This value is applicable only when TrigCtl=TTL.

IO4

MC_TrigLine_IO4

The channel trigger line is found on the System connector at the Enhanced IO4/pin 4 terminal. This value is applicable only when TrigCtl=TTL.

TRX

MC_TrigLine_TRX

The channel trigger line is found on the System connector at the differential input pair TRX/pins 6 and 11 terminals. This value is applicable only when TrigCtl=LVDS.

TRY

MC_TrigLine_TRY

The channel trigger line is found on the System connector at the differential input pair TRY/pins 7 and 12 terminals. This value is applicable only when TrigCtl=LVDS.

Values applicable to Domino Symphony

Name

Identifier

Description

NOM

MC_TrigLine_NOM

The relevant trigger line is TRA, TRB, TRC, or TRD according to the camera connector feeding the channel and independently of the value of TrigCtl.

IO1

MC_TrigLine_IO1

The trigger line is the IO1 line on the System connector. This value is applicable only only for camera A when TrigCtl=TTL.

IO2

MC_TrigLine_IO2

The trigger line is the IO2 line on the System connector. This value is applicable only only for camera B when TrigCtl=TTL.

IO3

MC_TrigLine_IO3

The trigger line is the IO3 line on the System connector. This value is applicable only only for camera C when TrigCtl=TTL.

IO4

MC_TrigLine_IO4

The trigger line is the IO4 line on the System connector. This value is applicable only only for camera D when TrigCtl=TTL.

TRA

MC_TrigLine_TRA

The trigger line is the TRA line on the System connector. This value is applicable only for camera A when TrigCtl=LVDS.

TRB

MC_TrigLine_TRB

The trigger line is the TRB line on the System connector. This value is applicable only for camera B when TrigCtl=LVDS.

TRC

MC_TrigLine_TRC

The trigger line is the TRC line on the System connector. This value is applicable only for camera C when TrigCtl=LVDS.

TRD

MC_TrigLine_TRD

The trigger line is the TRD line on the System connector. This value is applicable only for camera D when TrigCtl=LVDS.