Camera Active Area
The Camera Active Area represents the rectangular array of pixels containing active video that are delivered by the camera to the frame grabber.
Hactive_Px Limits
For all cameras, the MultiCam parameter Hactive_Px represents the number of pixels in each line of the Camera Active Area.
The following restrictions apply to the value of Hactive_Px.
Restriction #1
The width of the Camera Active Area may contain at most 65535 pixels.
Restriction #2
Each tap delivers the same amount of pixels every line. In addition, Hactive_Px must be a multiple of XTaps.
- N is an integer number
- XTaps is the number of taps along the X direction. XTaps can be obtained from the value of TapGeometry by multiplying together the two numbers surrounding the letter "X". For example, 1X2, 1X2_1Y, 1X2_1Y2, 2X, 2X_1Y have all 2 taps along the X direction.
Restriction #3
Each region must contain at least MinBytesPerRegionLine.
- MinBytesPerRegionLine = 48
- XRegions is the number of geometrical regions in the X direction. XRegions can be obtained from the value of TapGeometry. TapGeometry is the number proceeding the letter "X". For example: 2X, 2X_1Y, 2X2 have all 2 regions along the X direction.
- BytesPerPixel is the amount of bytes to store 1 pixel into the on-board memory:
- 1 byte for 8-bit monochrome and Bayer CFA cameras
- 2 bytes for 10/12/14/16-bit monochrome and Bayer CFA cameras
- 3 bytes for 24-bit RGB cameras
- 6 bytes for 30-bit and 36-bit RGB cameras
TapConfiguration |
TapGeometry |
Min. value |
Multiple of… |
Max. value |
BASE_1T8 |
1X |
48 |
1 |
65535 |
BASE_1T10 |
1X |
24 |
1 |
65535 |
BASE_1T24 |
1X |
16 |
1 |
65535 |
MEDIUM_1T30 |
1X |
8 |
1 |
65535 |
BASE_2T8 |
1X2 |
48 |
2 |
65534 |
BASE_2T10 |
1X2 |
24 |
2 |
65534 |
MEDIUM_2T24 |
1X2 |
16 |
2 |
65534 |
BASE_2T8 |
2X |
96 |
2 |
65534 |
BASE_2T10 |
2X |
48 |
2 |
65534 |
MEDIUM_2T24 |
2X |
32 |
2 |
65534 |
BASE_3T8 |
1X3 |
48 |
3 |
65535 |
MEDIUM_3T10 |
1X3 |
24 |
3 |
65535 |
BASE_3T8 |
3X |
144 |
3 |
65535 |
MEDIUM_3T10 |
3X |
72 |
3 |
65535 |
MEDIUM_4T8 |
1X4 |
48 |
4 |
65532 |
MEDIUM_4T10 |
1X4 |
24 |
4 |
65532 |
MEDIUM_4T8 |
4X |
192 |
4 |
65532 |
MEDIUM_4T10 |
4X |
96 |
4 |
65532 |
FULL_8T8 |
1X8 |
48 |
8 |
65528 |
FULL_8T8 |
8X |
384 |
8 |
65528 |
DECA_10T8 |
1X10 |
50 |
10 |
65530 |
DECA_10T8 |
10X |
480 |
10 |
65530 |
Vactive_Ln Limits
For area-scan cameras only, the MultiCam parameter Vactive_Ln represents the number of lines of the Camera Active Area.
The following restrictions apply to the value of Vactive_Ln.
Restriction #1
The camera active window may contain at most 65535 lines.
Restriction #2
Each tap delivers exactly the same amount of pixels. In addition, Vactive_Ln must be a multiple of YTaps.
- N is an integer number
- YTaps is the number of taps along the Y direction. YTaps can be obtained from the value of TapGeometry by multiplying together the two numbers surrounding the letter "Y". For example: 1X_1Y2, 1X_2YE have all 2 taps along the Y direction.