| Picolo | Picolo Junior 4 | Picolo Pro 2 | Picolo Pro 3 | Picolo Tetra | Picolo Tymo | Picolo Alert | Picolo Diligent |
| Domino Iota | Domino Alpha 2 | Domino Melody | Domino Harmony | Domino Symphony |
| Grablink Value | Grablink Expert 2 | Grablink Avenue | Grablink Express | Grablink Quickpack ColorScan | Grablink Quickpack CFA | Grablink Full XR | Grablink Full | Grablink DualBase | Grablink Base |
Description
Type |
Integer |
Description |
Control of trigger delay before the reset pulse is sent to the camera |
"Set" effect |
Sets the delay before the reset pulse |
"Get" effect |
Returns the currently selected delay |
Classification
Class |
Channel |
Category |
Trigger Control |
Level |
Adjust |
Identifiers
String |
TrigDelay_us |
C, C++ |
MC_TrigDelay_us |
.NET |
MC.TrigDelay_us |
Numerical |
2153 |
This parameter can be used to insert a delay between the hardware trigger and the reset pulse sent to the camera.
Note. This parameter does not affect so software triggers, use a software timer to manage the image acquisition.
Its value must be defined in microseconds (10-6 s). It may range from 0 up to 2 seconds.
It is applicable exclusively for area-scan cameras.
Note. For line-scan cameras, use instead PageDelay_Ln.
This parameter applies when acquisition control settings require a hardware trigger (SNAPSHOT and HFR acquisition modes).