Picolo

Picolo Junior 4

Picolo Pro 2

Picolo Pro 3

Picolo Tetra

Picolo Tymo

Picolo Alert

Picolo Diligent

Domino Iota

Domino Alpha 2

Domino Melody

Domino Harmony

Domino Symphony

Grablink Value

Grablink Expert 2

Grablink Avenue

Grablink Express

Grablink Quickpack ColorScan

Grablink Quickpack CFA

Grablink Full XR

Grablink Full

Grablink DualBase

Grablink Base

Description

Type	Integer
Description	Line pitch control for rate converter programming
"Set" effect	Sets the line pitch measurement
"Get" effect	Returns the currently involved line pitch measurement

Classification

Class	Channel
Category	Encoder Control
Level	Adjust

Identifiers

String	LinePitch
C, C++	MC_LinePitch
.NET	MC.LinePitch
Numerical	595

This parameter applies when the motion encoder is in use with rate conversion. Refer to the MultiCam User Guide.

The parameter declares in an arbitrary length unit the distance between two successively scanned lines on the observed moving web.

Along with EncoderPitch, it allows for programming the rate converter issuing the line rate in line-scan systems. The EncoderPitch parameter should be expressed in the same length unit.

Provided ConverterTrim is 0, the programmed rate conversion ratio is:

rate conversion ratio =

The resulting downweb line rate is:

line rate = encoder rate ´ rate conversion ratio

The encoder rate at a given time is the frequency of the pulses delivered by the motion encoder while the observed web is moving.