JumperH Parameter
Depending on the Camera and CamConfig presently selected, the JumperH parameter indicates how to configure the H jumper block for the relevant channel.
JumperH |
H block strapping |
Description |
TTL |
|
The pin 14 (HIO) and pin 15 (GATE) of the connector feeding the channel can be used as input or output in TTL format |
DPOS |
The pin 14 (HIO) and pin 15 (GATE) of the connector are used to sense a non inverted differential horizontal reference from the camera feeding the channel |
|
DNEG |
The pin 14 (HIO) and pin 15 (GATE) of the connector are used to sense an inverted differential horizontal reference from the camera feeding the channel |
