Board and Bracket Layout

Board Layout

PICOLO Alert board layout

Bracket Layout

The bracket attached to Picolo Alert provides 4 BNC connectors and a block of 4 corresponding 75 Ω switches.

The 4 BNC connectors are for camera connection. They are color or monochrome composite inputs, terminated with removable 75 Ω resistors.

These connectors are called, from top to bottom, VIDEO1, VIDEO2, VIDEO3 and VIDEO4.

The switch n (with n = 1, 2, 3 or 4) controls the 75 Ω termination of the corresponding VIDEOn input.

The switches are ON, all video inputs are terminated

In the factory configuration, all video terminations are set and all switches are ON. To remove the termination, toggle the switch to the OFF position.

PICOLO Alert bracket layout