VIDEOn Connectors
Picolo Tetra offers four on-board BNC connectors for camera connection. They are named VIDEO1, VIDEO2, VIDEO3 and VIDEO4. They are selectable color or monochrome composite inputs.
2-pin female receptacle, right-angled PCB-mount, BNC connector
(bracket viewed from outside)
VIDEO<1..4> pins assignment
Pin location |
Pin name |
Usage |
Center |
VIDEO<1..4> |
|
Outer |
GND |
Signal ground |
VIDEOn video inputs (with n = 1 to 4) have an on-board video termination resistor. The solder bridge BRn, located at the back of the board, controls the 75Ω termination of the corresponding VIDEOn input. To activate a termination resistor, establish the adequate solder connection BRn. At delivery, no termination resistor is connected.
RC PCB termination