MultiCam Boards Documentation > DOMINO series Documentation > DOMINO Alpha 2 Handbook > System Integration > Power Connector

Power Connector

This board provides an additional connector to power auxiliary external equipment and connected cameras through the camera cable. This connector is fed with a hard-disk drive power link from the host computer power supply.

4-pin male receptacle, 5.08mm pitch, disk drive power connection system header
(board viewed from component side)

Camera Power pins assignment

Pin #

Pin name

Usage

1

+12V

+12V power input

2

GND

Signal ground

3

GND

Signal ground

4

-

Not connected