Wiring
Conductor |
Signal @ Camera |
Signal @ Board |
DB9M pin |
HD15M pin |
Nominal Function |
|
Shield |
SGND |
SGND |
Shell clamp |
Shell clamp |
EMC shield |
|
Coaxial inner |
GREEN out |
V1+ |
4 |
1 |
Video channel 1 |
|
Coaxial outer |
GND |
V1- |
1 |
2 |
Video return |
|
Coaxial inner |
RED out |
V2+ |
3 |
11 |
Video channel 2 |
|
Coaxial outer |
GND |
V2- |
1 |
12 |
Video return |
|
Coaxial inner |
BLUE out |
V3+ |
5 |
9 |
Video channel 1 |
|
Coaxial outer |
GND |
V3- |
1 |
10 |
Video return |
|
Twisted pair |
Discrete wire |
TRIGGER in |
RST |
9 |
8 |
Reset pulse |
Optional |
GND |
GND |
1 |
3 |
Reset return (*) |
|
Discrete wire, Optional |
GND |
GND |
1 |
3 |
Signal return (**) |
|
Not used |
GND |
Not used |
13 |
Not used |
||
GATE |
15 |
|||||
EXP |
5 |
|||||
HIO |
14 |
|||||
VIO |
4 |
|||||
+12V |
6 |
|||||
PGND |
7 |
|||||
(*) Establish this ground connection if a twisted pair is used instead of a discrete wire.
(**) Establish this ground connection if discrete wires are used instead of a twisted pair.
Camera signal naming conventions do not necessarily apply to all cameras supported by this cable.
Twisted pairs can be equally used where indicated.