| Picolo | Picolo Junior 4 | Picolo Pro 2 | Picolo Pro 3 | Picolo Tetra | Picolo Tymo | Picolo Alert | Picolo Diligent |
| Domino Iota | Domino Alpha 2 | Domino Melody | Domino Harmony | Domino Symphony |
| Grablink Value | Grablink Expert 2 | Grablink Avenue | Grablink Express | Grablink Quickpack ColorScan | Grablink Quickpack CFA | Grablink Full XR | Grablink Full | Grablink DualBase | Grablink Base |
Description
Type |
Enumerated |
Description |
PoCL (Power over Camera Link) controller status |
"Set" effect |
– |
"Get" effect |
Returns the PoCL controller status |
Classification
Class |
Board |
Category |
Grabber Configuration |
Level |
Expert |
Identifiers
String |
PoCL_Status |
C, C++ |
MC_PoCL_Status |
.NET |
MC.PoCL_Status |
Numerical |
9941 |
Possible values
Name |
Identifier |
Description |
NO_CAMERA |
MC_PoCL_Status_NO_CAMERA |
There is no camera connected. To be detected, the attached camera must deliver a clock signal on Channel_Link_X. |
CONVENTIONAL_CAMERA |
MC_PoCL_Status_CONVENTIONAL_CAMERA |
The camera connected is either a conventional camera or is connected through a non-PoCL cable. |
PoCL_CAMERA |
MC_PoCL_Status_PoCL_CAMERA |
The camera connected is a PoCL capable camera and it is powered by the frame grabber. To be detected as a PoCL camera, the camera and the cable must be PoCL-compliant. For dual cable configurations (Medium, Full, 80-bit), the camera is declared PoCL-compliant if at least one of the two PoCL controllers identifies a PoCL-compliant camera/cable combination. |