Supply
Camera Side
Designator |
Connector family |
Description |
Wiring method |
HR6F |
Circular Hirose HR10A series "Snap-In" |
6-pin female plug |
Soldering type |
The connector shell is part of the supply.
Board Side
Designator |
Connector family |
Description |
Wiring method |
HD15M |
High-density D-subminiature |
15-pin 3-row male plug |
Solder cups |
The maximum shell width is 31.5 mm.
The connector shell should be conductive for electromagnetic compatibility.
Cable
Structure |
Impedance |
Minimal Gauge |
Note |
|
3 coaxial cables |
75 ohms |
N/A |
Maximum recommended length: 10 meters |
|
2discrete wires |
N/A |
AWG 24 |
0.2 mm2 |
|
Overall shield |
80% coverage |
|||
The above specification applies to an off-the-shelf cable.
Twisted pair lines may be used instead of the coaxial cables and discrete wires.
Suggested Suppliers
Supplier |
Item |
Part Number |
Amphenol |
15 pin high-density D-subminiature connector |
G17S-H15-10-000 |
Nickel plated connector shell |
G17Z-0913 |
|
Interkontakt |
15 pin high-density D-subminiature connector |
DDM-15HS-0059 |
Full metal connector shell |
DKK-09HS-9350 |
|
Manfred Sticksel |
Cable with pre-wired HR6F connector |
6PxxS |
The above list is just a suggestion. Components with equivalent characteristics can be chosen.