Connecting VEB as Additional Output

VEB can also be used for video output of digitalized images. It can be connected to Picolo Tetra.

When using VEB as output, it is mandatory to link it using the VEB LINK (video out) connector of the board.

Notes. On each video output, the 75Ω termination should be removed. Therefore, set all the switches to the OFF position. Before installing or removing any VEB, power down the PC. When using VEBs, always connect the new VEB in ascending order.

Video Output Routing

As an alternative to looped-through connecting the video sources, Picolo Tetra offers four buffered video outputs. Available on the VEB LINK (video out) connector, the video outputs conveniently bring back outside the video signals being digitized.

The user can implement a proprietary wiring system to use this connector. However, it is recommended to use a VEB as the most reliable way to maintain electromagnetic compatibility.

Video output routing