Board and Bracket Layout
Dimensions |
168mm x 69mm |
PCIe connector |
1-lane |
Video connections |
1 Camera Link camera in Base or Lite configuration |
Grablink Base comes with two parts:
- A standard-profile board assembly (board + standard-profile bracket)
- An extra low-profile bracket
Grablink Base standard-profile board assembly can be converted into a Grablink Base low-profile board assembly by exchanging the original bracket with the low-profile bracket.
Board Layout
Grablink Base standard-profile board layout
Standard-Profile Bracket Layout
Grablink Base has two types of bracket, a mounted standard-profile bracket and an extra low-profile bracket.
The standard-profile board can be plugged into a slot of a standard-profile chassis having a PCI Express x1, x4, x8, or x16 connector.
Grablink Base standard-profile bracket layout
Low-Profile Bracket Layout
The low-profile bracket enables you to fit Grablink Base into a low-profile PCI slot.
The low-profile board can be plugged into a slot of a low-profile chassis having a PCI Express x1, x4, x8, or x16 connector.
In order to install the low-profile bracket, remove the original standard-profile bracket by using a flat screwdriver, and re-install the screw locks of the Camera Link connector.
Grablink Base low-profile bracket layout