Accessory: I/O Cable for Grablink DualBase
Description and Features
This accessory exposes on a bracket one of the two sets of I/O lines available from one of the two internal I/O connectors of Grablink DualBase. The I/O Cable for Grablink DualBase is an accessory delivered separately. Up to two I/O cables can equip a Grablink DualBase to expose on two different additional brackets the two sets of I/O lines (one per camera) available from Grablink DualBase.
I/O Cable for Grablink DualBase
The assembly is composed of:
- A standard-height PC bracket
- A DB25F —25-pin female sub-D— connector, attached on the bracket with 2 UNC 4-40 female screwlocks, and secured with washers
- A 200mm long 26-wire flat cable
- A PH26F —0.1" (2.54mm)-pitch dual-row 26-pin female— connector.
Wires and Connectors
The following table describes the wiring list of the cable assembly. It also indicates the usage of each connection when the PH26F connector is plugged into anyone of the internal I/O connectors of Grablink DualBase.
Wire # |
DB25F pin # |
PH26F pin # |
Usage |
1 |
- |
1 |
Ground |
2 |
1 |
2 |
Ground |
3 |
14 |
3 |
High-speed diff. input #1 – Positive pole |
4 |
2 |
4 |
High-speed diff. input #1 – Negative pole |
5 |
15 |
5 |
High-speed diff. input #2 – Positive pole |
6 |
3 |
6 |
High-speed diff. input #2 – Negative pole |
7 |
16 |
7 |
Isolated input #1 – Positive pole |
8 |
4 |
8 |
Isolated input #1 – Negative pole |
9 |
17 |
9 |
Isolated input #2 – Positive pole |
10 |
5 |
10 |
Isolated input #2 – Negative pole |
11 |
18 |
11 |
Isolated input #3 – Positive pole |
12 |
6 |
12 |
Isolated input #3 – Negative pole |
13 |
19 |
13 |
Isolated input #4 – Positive pole |
14 |
7 |
14 |
Isolated input #4 – Negative pole |
15 |
20 |
15 |
Isolated contact output #1 – Positive pole |
16 |
8 |
16 |
Isolated contact output #1 – Negative pole |
17 |
21 |
17 |
Isolated contact output #2 – Positive pole |
18 |
9 |
18 |
Isolated contact output #2 – Negative pole |
19 |
22 |
19 |
Isolated contact output #3 – Positive pole |
20 |
10 |
20 |
Isolated contact output #3 – Negative pole |
21 |
23 |
21 |
Isolated contact output #4 – Positive pole |
22 |
11 |
22 |
Isolated contact output #4 – Negative pole |
23 |
24 |
23 |
+5V power output |
24 |
12 |
24 |
Ground |
25 |
25 |
25 |
+12V power output |
26 |
13 |
26 |
Ground |
Mounting
The PH26F connector of this accessory is to be mounted on the internal IO A or the internal IO B connector of Grablink DualBase.
One I/O cable connected to Grablink DualBase