MultiCam Boards Documentation > MultiCam Documentation > MultiCam Reference > Channel Class > Camera Timing Category > Expert Level (Camera Timing) > VsyncAft_Ln

VsyncAft_Ln

Picolo Picolo Junior 4 Picolo Pro 2 Picolo Pro 3 Picolo Tetra Picolo Tymo Picolo Alert Picolo Diligent

Description

Type

Integer

Description

Vertical delay between vertical synchronization pulse and camera active window

"Set" effect

Sets the vertical delay

"Get" effect

Returns the vertical delay currently involved

Classification

Class

Channel

Category

Camera Timing

Level

Expert

Identifiers

String

VsyncAft_Ln

C, C++

MC_VsyncAft_Ln

.NET

MC.VsyncAft_Ln

Numerical

712

This delay is normally counted as a number of video lines. In case of interlaced scanning, and for some special tap structures, the counting unit is the video half-line.

This parameter applies to area-scan cameras delivering a separate vertical synchronization pulse used by the frame grabber to monitor the camera timing (digital synchronization mode).

If this pulse is not available, the vertical synchronization embedded in the composite video signal is used instead (analog synchronization mode). In this case, the VCsyncAft_Ln parameter is significant.

The delay is counted from to the leading edge of the vertical synchronization pulse delivered by the camera.