| Picolo | Picolo Junior 4 | Picolo Pro 2 | Picolo Pro 3 | Picolo Tetra | Picolo Tymo | Picolo Alert | Picolo Diligent |
| Domino Iota | Domino Alpha 2 | Domino Melody | Domino Harmony | Domino Symphony |
| Grablink Value | Grablink Expert 2 | Grablink Avenue | Grablink Express | Grablink Quickpack ColorScan | Grablink Quickpack CFA | Grablink Full XR | Grablink Full | Grablink DualBase | Grablink Base |
Description
Type |
Enumerated |
Description |
Designation of line chosen for transporting main reset to camera |
"Set" effect |
- |
"Get" effect |
Returns the main reset line currently assigned |
Classification
Class |
Channel |
Category |
Cable Features |
Level |
Expert |
Identifiers
String |
ResetLine |
C, C++ |
MC_ResetLine |
.NET |
MC.ResetLine |
Numerical |
1158 |
This parameter declares which line is used inside the camera cable to connect the main reset signal from the frame grabber to the camera.
Some cameras use an additional reset control line to independently control the expose and read-out functions. Refer to the AuxResetLine parameter.
Values applicable to Domino Iota, Domino Alpha 2
Name |
Identifier |
Description |
RST |
MC_ResetLine_RST |
The main reset uses the RST line (connector pin 8). |
VIO |
MC_ResetLine_VIO |
The main reset uses the VIO line (connector pin 4). |
NC |
MC_ResetLine_NC |
No main reset line to connect. |
Values applicable to Domino Melody, Domino Harmony, Domino Symphony
Name |
Identifier |
Description |
CC1 |
MC_ResetLine_CC1 |
The main reset uses the CC1 camera control line. |
CC2 |
MC_ResetLine_CC2 |
The main reset uses the CC2 camera control line. |
CC3 |
MC_ResetLine_CC3 |
The main reset uses the CC3 (ex-VIO) line (connector pin 4). |
CC4 |
MC_ResetLine_CC4 |
The main reset uses the CC4 camera control line. |
CC5 |
MC_ResetLine_CC5 |
The main reset uses the CC5 (ex-RST) line (connector pin 8). |
NC |
MC_ResetLine_NC |
No main reset line to connect. |
Values applicable to Grablink series
Name |
Identifier |
Description |
CC1 |
MC_ResetLine_CC1 |
The main reset uses the CC1 camera control line. |
CC2 |
MC_ResetLine_CC2 |
The main reset uses the CC2 camera control line. |
CC3 |
MC_ResetLine_CC3 |
The main reset uses the CC3 camera control line. |
CC4 |
MC_ResetLine_CC4 |
The main reset uses the CC4 camera control line. |
NC |
MC_ResetLine_NC |
The main reset is not used and not connected. |