| Picolo | Picolo Junior 4 | Picolo Pro 2 | Picolo Pro 3 | Picolo Tetra | Picolo Tymo | Picolo Alert | Picolo Diligent |
| Domino Iota | Domino Alpha 2 | Domino Melody | Domino Harmony | Domino Symphony |
| Grablink Value | Grablink Expert 2 | Grablink Avenue | Grablink Express | Grablink Quickpack ColorScan | Grablink Quickpack CFA | Grablink Full XR | Grablink Full | Grablink DualBase | Grablink Base |
Description
Type |
Enumerated |
Description |
Designation of line chosen for transporting auxiliary reset to camera |
"Set" effect |
- |
"Get" effect |
Returns the auxiliary reset line currently assigned |
Classification
Class |
Channel |
Category |
Cable Features |
Level |
Expert |
Identifiers
String |
AuxResetLine |
C, C++ |
MC_AuxResetLine |
.NET |
MC.AuxResetLine |
Numerical |
1159 |
This parameter declares which line is used inside the camera cable to connect the auxiliary reset signal from the frame grabber to the camera.
Some cameras (area-scan or line-scan) use two reset control lines to independently control the expose and read-out functions. Refer to the ResetCtl parameter.
Values applicable to Domino Iota, Domino Alpha 2
Name |
Identifier |
Description |
RST |
MC_AuxResetLine_RST |
The auxiliary reset uses the RST line (connector pin 8). |
VIO |
MC_AuxResetLine_VIO |
The auxiliary reset uses the VIO line (connector pin 4). |
NC |
MC_AuxResetLine_NC |
No auxiliary reset line to connect. |
Values applicable to Domino Melody, Domino Harmony, Domino Symphony
Name |
Identifier |
Description |
CC5 |
MC_AuxResetLine_CC5 |
The auxiliary reset uses the CC5 (ex-RST) line (connector pin 8). |
CC3 |
MC_AuxResetLine_CC3 |
The auxiliary reset uses the CC3 (ex-VIO) line (connector pin 4). |
NC |
MC_AuxResetLine_NC |
No auxiliary reset line to connect. |
Values applicable to Grablink series
Name |
Identifier |
Description |
CC1 |
MC_AuxResetLine_CC1 |
The auxiliary reset uses the CC1 camera control line. |
CC2 |
MC_AuxResetLine_CC2 |
The auxiliary reset uses the CC2 camera control line. |
CC3 |
MC_AuxResetLine_CC3 |
The auxiliary reset uses the CC3 camera control line. |
CC4 |
MC_AuxResetLine_CC4 |
The auxiliary reset uses the CC4 camera control line. |
NC |
MC_AuxResetLine_NC |
No auxiliary reset line to connect. |