NextTrigMode

Description

Type	Enumerated
Description	Grabber subsequent acquisition phases or slices triggering mode
"Set" effect	Sets the subsequent acquisition phases or slices triggering mode
"Get" effect	Returns the current subsequent acquisition phases or slices triggering mode

Classification

Identifiers

The NextTrigMode parameter establishes the starting conditions of the subsequent acquisition phases or slices.

Refer to the MultiCam Acquisition Principles application note.

Possible values

Name	Identifier	Description
COMBINED	MC_NextTrigMode_COMBINED	Any subsequent acquisition phase or slice is delayed until detection of hardware or software trigger.
HARD	MC_NextTrigMode_HARD	Any subsequent acquisition phase or slice is delayed until the hardware trigger line senses a valid transition. Parameters TrigLine or TrigLineIndex specifies the location of a hardware trigger input line. Parameters TrigCtl, TrigEdge and TrigFilter specify the configuration of the hardware trigger input line. A programmable delay can be inserted with parameter PageDelay_Ln.
PERIODIC	MC_NextTrigMode_PERIODIC	Any subsequent acquisition phase is periodically triggered according to TargetFrameRate_Hz.
REPEAT	MC_NextTrigMode_REPEAT	Any subsequent acquisition phase or slice occurs immediately after the preceding one.
SAME	MC_NextTrigMode_SAME	Any subsequent acquisition phase or slice occurs similarly to the conditions defined by TrigMode.
SOFT	MC_NextTrigMode_SOFT	Any subsequent acquisition phase or slice is delayed until the software sets parameter ForceTrig to TRIG.
SLAVE	MC_NextTrigMode_SLAVE

Applicable values to Picolo boards

On Picolo boards, the default value is SAME.

Applicable values to Domino boards

On Domino boards, the default value is SAME.

Applicable values to Grablink boards

NextTrigMode	Grablink Value	Grablink Expert 2	Grablink Avenue	Grablink Express	Grablink Quickpack ColorScan	Grablink Quickpack CFA	Grablink Quickpack CFA PCIe	Grablink Full XR	Grablink Full	Grablink DualBase	Grablink Base
COMBINED	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
HARD	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
PERIODIC			✓	✓		✓	✓
REPEAT	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
SAME	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
SOFT	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓

On Grablink boards, the default value depends on the selected AcquisitionMode: