StrobeCtl

Picolo Diligent

Description

Type	Enumerated
Description	Electrical style of designated strobe pulse to illumination system
"Set" effect	Sets the strobe pulse electrical style
"Get" effect	Returns the current strobe pulse electrical style

Classification

Identifiers

This parameter declares the attributes of the strobe line designated by StrobeLine sent by the channel and aimed at generating an illumination pulse.

Values applicable to Domino Iota, Domino Alpha 2

Name	Identifier	Description
TTL	MC_StrobeCtl_TTL	The strobe line is a TTL compliant signal.

Values applicable to Domino Melody, Domino Harmony, Domino Symphony

Name	Identifier	Description
TTL	MC_StrobeCtl_TTL	The strobe line is a TTL compliant signal.
OPTO	MC_StrobeCtl_OPTO	The strobe line is issued on an opto-isolated pair pin of pin. The + pin is the collector and the - pin is the emitter of an uncommitted photo- transistor driven by LED-emitted light.

Values applicable to Grablink Value, Grablink Expert 2, Grablink Quickpack ColorScan

Name	Identifier	Description
ITTL	MC_StrobeCtl_ITTL	The strobe line is an isolated TTL compliant signal actively tied to the high or low state.
IOC	MC_StrobeCtl_IOC	The strobe line is an isolated TTL compliant signal actively tied to the low state and passively tied to the high state through a 3000 Ω pull-up resistor.
IOE	MC_StrobeCtl_IOE	The strobe line is an isolated TTL compliant signal actively tied to the high state and passively tied to the low state through a 2000 Ω pull-down resistor.
TTL	MC_StrobeCtl_TTL	The strobe line is a TTL compliant signal.

Values applicable to Grablink Avenue, Grablink Express, Grablink Quickpack CFA

Name	Identifier	Description
ITTL	MC_StrobeCtl_ITTL	The strobe line is an isolated TTL compliant signal actively tied to the high or low state.
IOC	MC_StrobeCtl_IOC	The strobe line is an isolated TTL compliant signal actively tied to the low state and passively tied to the high state through a 3000 Ω pull-up resistor.
IOE	MC_StrobeCtl_IOE	The strobe line is an isolated TTL compliant signal actively tied to the high state and passively tied to the low state through a 2000 Ω pull-down resistor.
TTL	MC_StrobeCtl_TTL	The strobe line is a TTL compliant signal.
OPTO	MC_StrobeCtl_OPTO	The strobe line is issued on an opto-isolated pair pin of pin. The + pin is the collector and the - pin is the emitter of an uncommitted photo- transistor driven by LED-emitted light.

Values applicable to Grablink Full, Grablink Full XR, Grablink DualBase, Grablink Base

Name	Identifier	Description
OPTO	MC_StrobeCtl_OPTO	The strobe line is issued on an opto-isolated pair pin of pin. The + pin is the collector and the - pin is the emitter of an uncommitted photo- transistor driven by LED-emitted light.