StrobeLine

Picolo

Picolo Junior 4

Picolo Pro 2

Picolo Pro 3

Picolo Tetra

Picolo Tymo

Picolo Alert

Picolo Diligent

Grablink Quickpack ColorScan

Grablink Quickpack CFA

Grablink Full XR

Grablink Full

Grablink DualBase

Grablink Base

Description

Type	Enumerated
Description	Designation of hardware strobe line to illumination system
"Set" effect	Sets the hardware strobe line
"Get" effect	Returns the currently selected hardware strobe line

Classification

Class	Channel
Category	Strobe Control
Level	Expert

Identifiers

String	StrobeLine
C, C++	MC_StrobeLine
.NET	MC.StrobeLine
Numerical	837

It designates the hardware line driven by the channel and aimed at generating an illumination pulse.

The selection of the electrical style of the hardware line, by means of parameter StrobeCtl, is a prerequisite.

If the strobe signal was previously issued on another I/O line, reset OutputConfig to FREE for that line. Otherwise, the strobe signal will be issued on both I/O lines, the previously selected one and the new one.

On Grablink Value, Grablink Avenue and Grablink Expert 2, the designated StrobeLine is set to its inactive state when the channel goes inactive.

Values applicable to Domino Iota, Domino Alpha 2

Name	Identifier	Description
NOM	MC_StrobeLine_NOM	The channel strobe line is found on the TR-ST connector at the nominal terminal STX/pin 2 or STY/pin 3.

Values applicable to Domino Melody

Name	Identifier	Description
NOM	MC_StrobeLine_NOM	The channel strobe line is found on the System connector at the nominal terminal pin, according to the StrobeCtl value. When StrobeCtl=OPTO, the relevant strobe line is the output pair ST/pins 7 and 8. When StrobeCtl=TTL, the relevant strobe line is Enhanced IO2/pin 4.
IO1	MC_StrobeLine_IO1	The channel strobe line is found on the System connector at the terminal pin Enhanced IO1/pin 3. This value is applicable only when StrobeCtl=TTL.
IO2	MC_StrobeLine_IO2	The channel strobe line is found on the System connector at the terminal pin Enhanced IO2/pin 4. This value is applicable only when StrobeCtl=TTL.
ST	MC_StrobeLine_ST	The channel strobe line is found on the System connector at the differential output pair STX/pins 7 and 8. This value is applicable only when StrobeCtl=OPTO.

Values applicable to Domino Harmony

Name	Identifier	Description
NOM	MC_StrobeLine_NOM	The channel strobe line is found on the System connector at the nominal terminal pin, according to the StrobeCtl value. When StrobeCtl=OPTO, the relevant strobe line is the output pair STX/pins 8 and 13, or STY/pins 9 and 14, according to the camera connector feeding the channel. When StrobeCtl=TTL, the relevant strobe line is Enhanced IO2/pin 2 or Enhanced IO4/pin 4, according to the camera connector feeding the channel.
IO1	MC_StrobeLine_IO1	The channel strobe line is found on the System connector at the terminal pin Enhanced IO1/pin 1. This value is applicable only for camera X when StrobeCtl=TTL.
IO2	MC_StrobeLine_IO2	The channel strobe line is found on the System connector at the terminal pin Enhanced IO2/pin 2. This value is applicable only for camera X when StrobeCtl=TTL.
IO3	MC_StrobeLine_IO3	The channel strobe line is found on the System connector at the terminal pin Enhanced IO3/pin 3. This value is applicable only for camera Y when StrobeCtl=TTL.
IO4	MC_StrobeLine_IO4	The channel strobe line is found on the System connector at the terminal pin Enhanced IO4/pin 4. This value is applicable only for camera Y when StrobeCtl=TTL.
STX	MC_StrobeLine_STX	The channel strobe line is found on the System connector at the differential output pair STX/pins 8 and 13. This value is applicable only for camera X when StrobeCtl=OPTO.
STY	MC_StrobeLine_STY	The channel strobe line is found on the System connector at the differential output pair STY/pins 9 and 14. This value is applicable only for camera Y when StrobeCtl=OPTO.

Values applicable to Domino Symphony

Name	Identifier	Description
NOM	MC_StrobeLine_NOM	The channel strobe line is found on the System connector at the nominal terminal pin, according to the StrobeCtl value. When StrobeCtl=OPTO, the relevant strobe line is the corresponding output pair ST+ and ST-. When StrobeCtl=TTL, the relevant strobe line is the corresponding general purpose IO line.
IO1	MC_StrobeLine_IO1	The strobe line is the IO1 line on the System connector. This value is applicable only for camera A when StrobeCtl=TTL.
IO2	MC_StrobeLine_IO2	The strobe line is the IO2 line on the System connector. This value is applicable only for camera B when StrobeCtl=TTL.
IO3	MC_StrobeLine_IO3	The strobe line is the IO3 line on the System connector. This value is applicable only for camera C when StrobeCtl=TTL.
IO4	MC_StrobeLine_IO4	The strobe line is the IO4 line on the System connector. This value is applicable only for camera D when StrobeCtl=TTL.
STA	MC_StrobeLine_STA	The strobe line is the STA line on the System connector. This value is applicable only for camera A when StrobeCtl=OPTO.
STB	MC_StrobeLine_STB	The strobe line is the STB line on the System connector. This value is applicable only for camera B when StrobeCtl=OPTO.
STC	MC_StrobeLine_STC	The strobe line is the STC line on the System connector. This value is applicable only for camera C when StrobeCtl=OPTO.
STD	MC_StrobeLine_STD	The strobe line is the STD line on the System connector. This value is applicable only for camera D when StrobeCtl=OPTO.

Values applicable to Grablink Value, Grablink Quickpack ColorScan

Name	Identifier	Description
NOM	MC_StrobeLine_NOM	The channel strobe line is found on the System connector at the nominal terminal pin, according to the StrobeCtl value. When StrobeCtl=TTL, the relevant strobe line is STR/pin 9. When StrobeCtl=ITTL, IOC or IOE, the relevant strobe line is A1/pin 6.
STR	MC_StrobeLine_STR	The channel strobe line is found on the System connector at the terminal STR/pin 9. This value is applicable only when StrobeCtl=TTL.
ALT1	MC_StrobeLine_ALT1	The channel strobe line is found on the System connector at the terminal A1/pin 6. This value is applicable only when StrobeCtl=ITTL, IOC or IOE.
ALT2	MC_StrobeLine_ALT2	The channel strobe line is found on the System connector at the terminal A2/pin 7. This value is applicable only when StrobeCtl=ITTL, IOC or IOE.

Values applicable to Grablink Avenue, Grablink Express, Grablink Quickpack CFA

Name	Identifier	Description
NOM	MC_StrobeLine_NOM	The channel strobe line is found on the System connector at the nominal terminal pin, according to the StrobeCtl value. When StrobeCtl=OPTO, the relevant strobe line is STA. When StrobeCtl=TTL, the relevant strobe line is Enhanced IO2. When StrobeCtl=ITTL, IOC or IOE, the relevant strobe line is ISOA2.
IO1	MC_StrobeLine_IO1	The channel strobe line is found on the System connector at the terminal pin Enhanced IO1. This value is applicable only when StrobeCtl=TTL.
IO2	MC_StrobeLine_IO2	The channel strobe line is found on the System connector at the terminal pin Enhanced IO2. This value is applicable only when StrobeCtl=TTL.
IO3	MC_StrobeLine_IO3	The channel strobe line is found on the System connector at the terminal pin Enhanced IO3. This value is applicable only when StrobeCtl=TTL.
IO4	MC_StrobeLine_IO4	The channel strobe line is found on the System connector at the terminal pin Enhanced IO4. This value is applicable only when StrobeCtl=TTL.
ISOA1	MC_StrobeLine_ISOA1	The channel strobe line is found on the System connector at the terminal pin ISOA1. This value is applicable only when StrobeCtl=ITTL, IOC or IOE.
ISOA2	MC_StrobeLine_ISOA2	The channel strobe line is found on the System connector at the terminal pin ISOA2. This value is applicable only when StrobeCtl=ITTL, IOC or IOE.
STA	MC_StrobeLine_STA	The channel strobe line is found on the System connector at the terminal pin pair STA. This value is applicable only when StrobeCtl=OPTO.

Values applicable to Grablink Expert 2

Name	Identifier	Description
NOM	MC_StrobeLine_NOM	The channel strobe line is found on the System connector at the nominal terminal pin, according to the values of StrobeCtl and Connector parameters. When StrobeCtl=TTL and Connector=A or M, the relevant strobe line is STX/pin 4. When StrobeCtl=TTL and Connector=B, the relevant strobe line is STY/pin 3. When StrobeCtl=ITTL, IOC or IOE and Connector=A or M, the relevant strobe line is A1/pin 6. When StrobeCtl=ITTL, IOC or IOE and Connector=B, the relevant strobe line is B1/pin 8.
STX	MC_StrobeLine_STX	The channel strobe line is found on the I/O connector at the terminal STX/pin 4. This value is applicable only when StrobeCtl=TTL.
STY	MC_StrobeLine_STY	The channel strobe line is found on the I/O connector at the terminal STY/pin 3. This value is applicable only when StrobeCtl=TTL.
STZ	MC_StrobeLine_STZ	The channel strobe line is found on the I/O connector at the terminal STZ/pin 2. This value is applicable only when StrobeCtl=TTL.
ALT1	MC_StrobeLine_ALT1	The channel strobe line is found on the System connector at the terminal A1/pin 6 or B1/pin 8, according to the suffix (A or B) of the camera connector feeding the channel. This value is applicable only when StrobeCtl=ITTL, IOC or IOE.
ALT2	MC_StrobeLine_ALT2	The channel strobe line is found on the System connector at the terminal A2/pin 7 or B2/pin 9, according to the suffix (A or B) of the camera connector feeding the channel. This value is applicable only when StrobeCtl=ITTL, IOC or IOE.