Picolo | Picolo Junior 4 | Picolo Pro 2 | Picolo Pro 3 | Picolo Tetra | Picolo Tymo | Picolo Alert | Picolo Diligent |
Domino Iota | Domino Alpha 2 | Domino Melody | Domino Harmony | Domino Symphony |
Grablink Value | Grablink Expert 2 | Grablink Avenue | Grablink Express | Grablink Quickpack ColorScan | Grablink Quickpack CFA | Grablink Full XR | Grablink Full | Grablink DualBase | Grablink Base |
Description
Type |
Enumerated |
Description |
Designation of line trigger hardware line from outside system |
"Set" effect |
Sets the line trigger hardware line |
"Get" effect |
Returns the currently selected line trigger hardware line |
Classification
Class |
Channel |
Category |
Encoder Control |
Level |
Expert |
Identifiers
String |
LineTrigLine |
C, C++ |
MC_LineTrigLine |
.NET |
MC.LineTrigLine |
Numerical |
1334 |
This parameter applies when LineRateMode is set to PULSE or CONVERT.
It designates the terminal sensing the line trigger pulse. The line trigger pulse is processed by the grabber and transferred to the camera as the line reset pulse. Usually, this line trigger signal is generated by a motion encoder.
The LineTrigLine parameter designates where the line trigger pulse usually issued by a motion encoder should be applied.
Values applicable to Grablink Value
Name |
Identifier |
Description |
NOM |
MC_LineTrigLine_NOM |
The encoder trigger line is found on the System connector at the nominal terminal pin, according to the LineTrigCtl value. When LineTrigCtl=TTL, the relevant trigger line is TRG. When LineTrigCtl=ITTL or I12V, the relevant trigger line is A1. |
TRG |
MC_LineTrigLine_TRG |
The encoder trigger line is found on the System connector at the terminal TRG. This value is applicable only when LineTrigCtl=TTL. |
CAM |
MC_LineTrigLine_CAM |
The encoder trigger line is applied to the camera and transported through the SPARE downstream signal. |
Values applicable to Grablink Avenue and Grablink Express
Name |
Identifier |
Description |
NOM |
MC_LineTrigLine_NOM |
The encoder trigger line is found on the System connector at the nominal terminal pin, according to the LineTrigCtl value. When LineTrigCtl=LVDS, the relevant trigger line is the differential input pair TRA2. When LineTrigCtl=TTL, the relevant trigger line is Enhanced IO2. When LineTrigCtl=ITTL or I12V, the relevant trigger line is ISOA2. |
IO1 |
MC_LineTrigLine_IO1 |
The encoder trigger line is found on the System connector at the terminal pin Enhanced IO1. This value is applicable only when LineTrigCtl=TTL. |
IO2 |
MC_LineTrigLine_IO2 |
The encoder trigger line is found on the System connector at the terminal pin Enhanced IO2. This value is applicable only when LineTrigCtl=TTL. |
IO3 |
MC_LineTrigLine_IO3 |
The encoder trigger line is found on the System connector at the terminal pin Enhanced IO3. This value is applicable only when LineTrigCtl=TTL. |
IO4 |
MC_LineTrigLine_IO4 |
The encoder trigger line is found on the System connector at the terminal pin Enhanced IO4. This value is applicable only when LineTrigCtl=TTL. |
ISOA1 |
MC_LineTrigLine_ISOA1 |
The encoder trigger line is found on the System connector at the terminal pin ISOA1. This value is applicable only when LineTrigCtl=ITTL or I12V. |
ISOA2 |
MC_LineTrigLine_ISOA2 |
The encoder trigger line is found on the System connector at the terminal pin ISOA2. This value is applicable only when LineTrigCtl=ITTL or I12V. |
TRA1 |
MC_LineTrigLine_TRA1 |
The encoder trigger line is found on the System connector at the terminal pin pair TRA1. This value is applicable only when LineTrigCtl=LVDS. |
TRA2 |
MC_LineTrigLine_TRA2 |
The encoder trigger line is found on the System connector at the terminal pin pair TRA2.This value is applicable only when LineTrigCtl=LVDS. |
Values applicable to Grablink Expert 2
Name |
Identifier |
Description |
NOM |
MC_LineTrigLine_NOM |
The encoder trigger line is found on the System connector at the nominal terminal pin, according to the value and the suffix (A or B) of the camera connector feeding the channel. When LineTrigCtl=TTL, the relevant trigger line is TRX when camera connector A is feeding the channel. TRY is the relevant trigger line when connector B is feeding the channel. When LineTrigCtl=ITTL or I12V, the relevant trigger line is A1 or B1, according to the suffix (A or B) of the camera connector feeding the channel. |
TRX |
MC_LineTrigLine_TRX |
The encoder trigger line is found on the I/O connector at the terminal TRX. This value is applicable only when LineTrigCtl=TTL. |
TRY |
MC_LineTrigLine_TRY |
The encoder trigger line is found on the I/O connector at the terminal TRY. This value is applicable only when LineTrigCtl=TTL. |
TRZ |
MC_LineTrigLine_TRZ |
The encoder trigger line is found on the I/O connector at the terminal TRZ. This value is applicable only when LineTrigCtl=TTL. |
CAM |
MC_LineTrigLine_CAM |
The encoder trigger line is applied to the camera and transported through the SPARE downstream signal. |
Values applicable to Grablink Quickpack ColorScan
Name |
Identifier |
Description |
NOM |
MC_LineTrigLine_NOM |
The encoder trigger line is found on the System connector at the terminal A1. |
Values applicable to Grablink Full, Grablink Full XR, Grablink DualBase, Grablink Base
Name |
Identifier |
Description |
NOM |
MC_LineTrigLine_NOM |
Default setting. It designates the DIN1 line when LineTrigCtl=DIFF, the DIN1 and DIN2 pair of differential lines when LineTrigCtl=DIFF2, the IIN1 line when LineTrigCtl=ISO, the IIN1 and IIN2 pair of differential lines when LineTrigCtl=ISO2. This value is applicable only when LineTrigCtl=DIFF, DIFF2, ISO, or ISO2. |
DIN1 |
MC_LineTrigLine_DIN1 |
This value is applicable only when LineTrigCtl=DIFF. |
DIN2 |
MC_LineTrigLine_DIN2 |
This value is applicable only when LineTrigCtl=DIFF. |
DIN1_DIN2 |
MC_LineTrigLine_DIN1_DIN2 |
The pair of differential input lines DIN1 and DIN2. This value is applicable only when LineTrigCtl=DIFF2. |
IIN1 |
MC_LineTrigLine_IIN1 |
This value is applicable only when LineTrigCtl=ISO. |
IIN2 |
MC_LineTrigLine_IIN2 |
This value is applicable only when LineTrigCtl=ISO. |
IIN3 |
MC_LineTrigLine_IIN3 |
This value is applicable only when LineTrigCtl=ISO. |
IIN4 |
MC_LineTrigLine_IIN4 |
This value is applicable only when LineTrigCtl=ISO. |
IIN1_IIN2 |
MC_LineTrigLine_IIN1_IIN2 |
The pair of differential input lines IIN1 and IIN2. This value is applicable only when LineTrigCtl=ISO2. |
IIN3_IIN4 |
MC_LineTrigLine_IIN3_IIN4 |
The pair of differential input lines IIN3 and IIN4. This value is applicable only when LineTrigCtl=ISO2. |