Video Termination Jumpers
The TERMn (with n = 1, 2, 3 or 4) jumper controls the 75Ω termination of the corresponding VIDEOn input on Picolo Pro 3 and Module Pro 3.
The TERMn (with n = 1 to 12) jumper controls the 75Ω termination of the corresponding VIDEOn input on Module 12 Pro 3.
In the default configuration, all jumpers are 75Ω terminated. Therefore, all jumpers are shorted 
.
To use the looped-through technique on a video input, i.e. no load, its jumper must be removed (open 
).
Picolo Pro 3 and Module Pro 3 video termination jumpers
Module 12 Pro 3 video termination jumpers