MultiCam Boards Documentation > PICOLO series Documentation > PICOLO Pro 3 Handbook > System Integration > VIDEOn Connectors

VIDEOn Connectors

Picolo Pro 3 and Module Pro 3 offer four on-board BNC connectors for camera connection. They are named VIDEO1, VIDEO2, VIDEO3 and VIDEO4. They are selectable color or monochrome composite inputs.

2-pin female receptacle, right-angled PCB-mount, BNC connector
(bracket viewed from outside)

VIDEO<1..4> pins assignment

Pin location

Pin name

Usage

Center

VIDEO<1..4>

 

Outer

GND

Signal ground

VIDEO1, VIDEO2, VIDEO3 and VIDEO4 are terminated with removable 75Ω resistors. To modify the 75Ω termination setting, see Video Termination Jumpers.

Moreover, a bicolor LED is associated with each video input. Green means acquisition on the video input. Red indicates video disconnected; it remains red until another acquisition succeeds (video present). The first LED also lights green when the driver is started. It remains green until the first acquisition.