RS-485 Serial Line
The TERMS jumper controls the 120Ω termination of the RS-485 serial line (CTL connector).
Inserting a jumper enables the 120Ω resistor; this is the default configuration.
|
|
|
|
|
|
||
|
|
||
|
|
||
|
|
|
|
|
MultiCam Boards Documentation > PICOLO series Documentation > PICOLO Pro 3 Handbook > System Integration > RS-485 Serial Line |
The TERMS jumper controls the 120Ω termination of the RS-485 serial line (CTL connector).
Inserting a jumper enables the 120Ω resistor; this is the default configuration.