MIO Module Identification
All MIO Modules linked up with a Picolo Pro 3 or a Picolo Tetra must have a unique ID. Failing to do so will cause logic signal contention. Set the MIO Module ID when the system is shut off.
Configuration |
MIO Module ID |
1 additional MIO Module |
0 |
2 additional MIO Modules |
0, 1 |
3 additional MIO Modules |
0, 1, 2 |
4 additional MIO Modules |
0, 1, 2, 3 |
5 additional MIO Modules |
0, 1, 2, 3, 4 |
MIO Module identification jumpers
MIO Module ID |
SEL2 |
SEL1 |
SEL0 |
0 |
|
|
|
1 |
|
|
|
2 |
|
|
|
3 |
|
|
|
4 |
|
|
|
jumper shorted.
jumper open.