MultiCam Boards Documentation > PICOLO series Documentation > MIO Module Handbook > Installation > Connecting MIO Module to Picolo Pro 3

Connecting MIO Module to Picolo Pro 3

All MIO Modules linked up with a Picolo Pro 3 or a Picolo Tetra must have a unique ID.

Up to five MIO Modules can be connected to the same Picolo Pro 3.

MIO Modules are connected to Picolo Pro 3 with flat cables via the MOD LINK connectors of Picolo Pro 3, Module Pro 3 or Module 12 Pro 3.


MIO Modules do not need a PCI or ISA slot; any blind slot will be adequate.

MIO Modules must be attached behind Modules Pro 3 or behind the Module 12 Pro 3.

Correct and inoperative configurations