Home

Previous

Up

Next

MultiCam Boards Documentation > PICOLO series Documentation > MIO Module Handbook > Installation > Connecting MIO Module to Picolo Tetra
Connecting MIO Module to Picolo Tetra

All MIO Modules linked up with a Picolo Pro 3 or a Picolo Tetra must have a unique ID.

Up to five MIO Modules can be connected to the same Picolo Tetra.

MIO Modules are daisy-chained with flat cables at their MIO LINK connectors; one of them must be linked to the MIO LINK connector of the board.


All cables are identical and may be interchanged.

MIO Modules do not need a PCI slot; any blind slot is adequate.