Grabber Triggering Mode
In this mode, the trigger event associated to the channel can come from three origins:
- A specified logic transition on a hardware line managed by the grabber
- A special software control
- Another event
The first acquisition phase appearing in the acquisition sequence is discriminated and called the initial acquisition phase. It is caused by the initial trigger event.
The subsequent acquisition phases, if any, are caused by the trigger event subsequently occurring.
There is only one designated hardware-line able to supply trigger events, serving undistinguishingly the initial or subsequent acquisition phases.
The MultiCam adjust-level parameters establishing the triggering details are TrigMode and NextTrigMode.