LUT_Method

The user selects the LUT construction method by means of the LUT_Method parameter.

Note. The same LUT definition method applies for all LUT devices belonging to a channel.

Controlling parameters associated with each parametric definition method

LUT_Method	Applicable parametric LUT building control parameters
RESPONSE_CONTROL	LUT_Contrast LUT_Brightness LUT_Visibility LUT_Negative
EMPHASIS	LUT_Emphasis LUT_Negative
THRESHOLD	LUT_SlicingLevel LUT_SlicingBand LUT_LightResponse LUT_BandResponse LUT_DarkResponse

All controlling parameters are of the "float collection" type. The dimension of the collection is equal to the number of LUT devices per LUT set. Refer to 1.1.2 for the number of LUT devices per LUT set.

On boards with 1 LUT device per set, such as Domino Melody, the dimension is 1:

Collection member #	0
Associated color component	Luminance

On boards with 3 LUT devices per set, such as Grablink Quickpack ColorScan, the dimension is 3:

Collection member #	0	1	2
Associated color component	Red	Green	Blue

On boards with 4 LUT devices per set, such as Grablink Quickpack CFA, the dimension is 4:

Collection member #	0	1	2	3
Associated color component	Red	Green	Blue	Luminance