LUT

MultiCam Boards Documentation > GRABLINK series Documentation > GRABLINK Quickpack CFA Handbook > MultiCam Parameters > LUT

LUT

MultiCam parameters for Look-Up-Table operation

Parameter	Value list/range	Prerequisites
LUT_Method	See LUT Definition Methods
LUT_StoreIndex	[0:4]
LUT_UseIndex	[0:4]
LUT_Contrast	[0.0:2.0]	LUT_Method = RESPONSE_CONTROL
LUT_Brightness	[-1.0:1.0]	LUT_Method = RESPONSE_CONTROL
LUT_Visibility	[0.0:1.0]	LUT_Method = RESPONSE_CONTROL
LUT_Negative	FALSE, TRUE	LUT_Method = RESPONSE_CONTROL
LUT_Emphasis	[-1.0:1.0]	LUT_Method = RESPONSE_CONTROL or EMPHASIS
LUT_SlicingLevel	[0.0:1.0]	LUT_Method = EMPHASIS
LUT_SlicingBand	[0.0:1.0]	LUT_Method = THRESHOLD
LUT_LightResponse	[0.0:1.0]	LUT_Method = THRESHOLD
LUT_BandResponse	[0.0:1.0]	LUT_Method = THRESHOLD
LUT_DarkResponse	[0.0:1.0]	LUT_Method = THRESHOLD