Connecting Module Pro 3

All the Modules Pro 3 linked up with a Picolo Pro 3 must have a unique ID.

The Modules Pro 3 are connected to Picolo Pro 3 directly or indirectly through other modules. The modules are linked with flat cables via the MOD LINK connectors.

If at least one Module Pro 3 is present, a Module 12 Pro 3 cannot be added.

Modules Pro 3 do not need a PCI or ISA slot; any blind slot will be adequate.

All cables are identical and may be interchanged. The flat cables should be as short as possible.

Connection with a flat cable

Correct configuration

In order to firmly secure the Module Pro 3 to the PC box, an additional plate and two screwnuts are delivered. The picture below indicates how to install these accessories.

Module Pro 3 with an additional plate and two screwnuts