Home

Previous

Up

Next

MultiCam Boards Documentation > PICOLO series Documentation > PICOLO Pro 3 Handbook > Installation > Connecting Module 12 Pro 3
Connecting Module 12 Pro 3

The Module 12 Pro 3 has no identification.

The unique Module 12 Pro 3 must be directly connected to Picolo Pro 3 with a flat cable via the MOD LINK connector.

Connection with a flat cable

A Module 12 Pro 3 cannot be used together with another Module 12 Pro 3 or Module Pro 3.

Module 12 Pro 3 does not need a PCI or ISA slot, any blind slot will be adequate.