List of CamFiles Templates
There are 9 CamFiles templates dedicated to the general purpose boards of the Grablink series.
CamFile name |
Camera |
CamConfig |
Board applicability |
MyCameraLink_LxxxxRC.cam |
MyCameraLink |
LxxxxRC |
Grablink boards |
MyCameraLink_LxxxxRG.cam |
MyCameraLink |
LxxxxRG |
Grablink boards |
MyCameraLink_LxxxxRP.cam |
MyCameraLink |
LxxxxRP |
Grablink boards |
MyCameraLink_LxxxxRP_DR.cam |
MyCameraLink |
LxxxxRP |
Grablink boards |
MyCameraLink_LxxxxSP.cam |
MyCameraLink |
LxxxxSP |
Grablink boards |
MyCameraLink_LxxxxSP_DR.cam |
MyCameraLink |
LxxxxSP |
Grablink boards |
MyCameraLink_PxxRC.cam |
MyCameraLink |
PxxRC |
Grablink boards |
MyCameraLink_PxxRG.cam |
MyCameraLink |
PxxRG |
Grablink boards |
MyCameraLink_PxxSC.cam |
MyCameraLink |
PxxSC |
Grablink boards |
The first column of the table shows the File name of the CamFile template. It is obtained by the concatenation of "MyCameraLink" with the value of the CamConfig parameter eventually following by the suffix "DR". The file name has the extension .cam.
The second column shows the value of the Channel parameter Camera.
The third column shows the value of the Channel parameter CamConfig. It uses the naming convention described in the Reference Manual.
The fourth column shows the board applicability of the CamFile template.