EndTrigCtl

Picolo Diligent

Domino Iota

Domino Alpha 2

Domino Melody

Domino Harmony

Domino Symphony

Grablink Quickpack ColorScan

Grablink Quickpack CFA

Description

Type	Enumerated
Description	Electrical style of designated end trigger hardware line from outside system
"Set" effect	Sets the end trigger hardware line electrical style
"Get" effect	Returns the currently chosen end trigger hardware line electrical style

Classification

Class	Channel
Category	Trigger Control
Level	Adjust

Identifiers

String	EndTrigCtl
C, C++	MC_EndTrigCtl
.NET	MC.EndTrigCtl
Numerical	3447

This parameter applies to the hardware line designated by EndTrigLine or EndTrigLineIndex.

Along with EndTrigEdge and EndTrigFilter, it declares the grabber attributes of the end trigger line sensed by the channel and aimed at generating the end trigger event.

This parameter applies when acquisition control settings require a hardware end trigger line (LONGPAGE acquisition mode).

Values applicable to Picolo Tymo, Picolo Alert

Name	Identifier	Description
AUTO	MC_EndTrigCtl_AUTO	The state of the input line is automatically interpreted. Setting InputStyle to a precise value yields better electrical performance such as better common mode rejection ratio. Default value.
RELAY	MC_EndTrigCtl_RELAY	A relay contact is connected to the input lines.
5V	MC_EndTrigCtl_5V	A 5 V TTL or CMOS driver is connected to the input lines.
12V	MC_EndTrigCtl_12V	A CMOS driver is connected to the input lines.

Values applicable to Picolo, Picolo Pro 2, Picolo Pro 3, Picolo Tetra

Name	Identifier	Description
TTL	MC_EndTrigCtl_TTL	The end trigger line is TTL compliant with a 4700 Ω pull-up resistor.

Values applicable to Grablink Value, Grablink Expert 2, Grablink Quickpack ColorScan

Name	Identifier	Description
TTL	MC_EndTrigCtl_TTL	The end trigger line is TTL compliant with a 4700 Ω pull-up resistor.
ITTL	MC_EndTrigCtl_ITTL	The end trigger line is isolated and TTL compliant with a 3000 Ω pull-up resistor.
I12V	MC_EndTrigCtl_I12V	The end trigger line is isolated and 12 V-logic compliant with a 2000 Ω pull-down resistor.

Values applicable to Grablink Avenue, Grablink Express, Grablink Quickpack CFA

Name	Identifier	Description
TTL	MC_EndTrigCtl_TTL	The end trigger line is TTL compliant with a 4700 Ω pull-up resistor.
ITTL	MC_EndTrigCtl_ITTL	The end trigger line is isolated and TTL compliant with a 3000 Ω pull-up resistor.
I12V	MC_EndTrigCtl_I12V	The end trigger line is isolated and 12 V-logic compliant with a 2000 Ω pull-down resistor.
LVDS	MC_EndTrigCtl_LVDS	The end trigger line is differential LVDS, RS-422 or RS-485 compatible.

Values applicable to Grablink Full, Grablink Full XR, Grablink DualBase, Grablink Base

Name	Identifier	Description
DIFF	MC_EndTrigCtl_DIFF	Differential high-speed input compatible with EIA/TIA-422 signaling.
ISO	MC_EndTrigCtl_ISO	Isolated current loop input compatible with TTL, +12V, +24V signaling. Default value.