EndTrigLine

Picolo

Picolo Junior 4

Picolo Pro 2

Picolo Pro 3

Picolo Tetra

Picolo Tymo

Picolo Alert

Picolo Diligent

Domino Iota

Domino Alpha 2

Domino Melody

Domino Harmony

Domino Symphony

Grablink Value

Grablink Expert 2

Grablink Avenue

Grablink Express

Grablink Quickpack ColorScan

Grablink Quickpack CFA

Description

Type	Enumerated
Description	Designation of the end trigger hardware line from outside system
"Set" effect	Sets the page break hardware line
"Get" effect	Returns the currently selected page break hardware line

Classification

Class	Channel
Category	Trigger Control
Level	Expert

Identifiers

String	EndTrigLine
C, C++	MC_EndTrigLine
.NET	MC.EndTrigLine
Numerical	2906

It designates the hardware line sensed by the channel and aimed at generating the end trigger event. The hardware line is only involved when EndTrigMode is HARD.

Values applicable to Grablink Avenue, Grablink Express, Grablink Quickpack CFA

Name	Identifier	Description
NOM	MC_EndTrigLine_NOM	The channel end trigger line is found on the System connector at the nominal terminal pin, according to the EndTrigCtl value. When EndTrigCtl=LVDS, the relevant end trigger line is the differential input pair TRA1. When EndTrigCtl=TTL, the relevant end trigger line is Enhanced IO1. When EndTrigCtl=ITTL or I12V, the relevant end trigger line is ISOA1.
IO1	MC_EndTrigLine_IO1	The channel end trigger line is found on the System connector at the terminal pin Enhanced IO1. This value is applicable only when EndTrigCtl=TTL.
IO2	MC_EndTrigLine_IO2	The channel end trigger line is found on the System connector at the terminal pin Enhanced IO2. This value is applicable only when EndTrigCtl=TTL.
IO3	MC_EndTrigLine_IO3	The channel end trigger line is found on the System connector at the terminal pin Enhanced IO3. This value is applicable only when EndTrigCtl=TTL.
IO4	MC_EndTrigLine_IO4	The channel end trigger line is found on the System connector at the terminal pin Enhanced IO4. This value is applicable only when EndTrigCtl=TTL.
ISOA1	MC_EndTrigLine_ISOA1	The channel end trigger line is found on the System connector at the terminal pin ISOA1. This value is applicable only when EndTrigCtl=ITTL or I12V.
ISOA2	MC_EndTrigLine_ISOA2	The channel end trigger line is found on the System connector at the terminal pin ISOA2. This value is applicable only when EndTrigCtl=ITTL or I12V.
TRA1	MC_EndTrigLine_TRA1	The channel end trigger line is found on the System connector at the terminal pin pair TRA1. This value is applicable only when EndTrigCtl=LVDS.
TRA2	MC_EndTrigLine_TRA2	The channel end trigger line is found on the System connector at the terminal pin pair TRA2. This value is applicable only when EndTrigCtl=LVDS.

Values applicable to Grablink Expert 2

Name	Identifier	Description
NOM	MC_EndTrigLine_NOM	The channel end trigger line is found on the System connector at the nominal terminal pin, according to the EndTrigCtl value. When EndTrigCtl=TTL, the relevant end trigger line is TRX when the camera connector feeding the channel is A; it is TRY when camera connector is B. When EndTrigCtl=ITTL or I12V, the relevant end trigger line is A2 or B2, according to the suffix (A or B) of the camera connector feeding the channel.
ALT1	MC_EndTrigLine_ALT1	The relevant end trigger line is A1 or B1, according to the suffix (A or B) of the camera connector feeding the channel. This value is applicable only when EndTrigCtl=ITTL or I12V.
ALT2	MC_EndTrigLine_ALT2	The relevant end trigger line is A2 or B2, according to the suffix (A or B) of the camera connector feeding the channel. This value is applicable only when EndTrigCtl=ITTL or I12V.
TRX	MC_EndTrigLine_TRX	The channel end trigger line is found on the I/O connector at the terminal TRX/pin 17. This value is applicable only when EndTrigCtl=TTL.
TRY	MC_EndTrigLine_TRY	The channel end trigger line is found on the I/O connector at the terminal TRY/pin 16. This value is applicable only when EndTrigCtl=TTL.
TRZ	MC_EndTrigLine_TRZ	The channel end trigger line is found on the I/O connector at the terminal TRZ/pin 15. This value is applicable only when EndTrigCtl=TTL.

Values applicable to Grablink Full, Grablink Full XR, Grablink DualBase, Grablink Base

Name	Identifier	Description
NOM	MC_EndTrigLine_NOM	This value (default) is applicable when EndTrigCtl=DIFF or ISO. When EndTrigCtl=DIFF, it designates the DIN2 line. When EndTrigCtl=ISO, it designates the IIN2 line.
DIN1	MC_EndTrigLine_DIN1	Differential high-speed input lines (two lines per camera). This value is applicable only when EndTrigCtl=DIFF.
DIN2	MC_EndTrigLine_DIN2	Differential high-speed input lines (two lines per camera). This value is applicable only when EndTrigCtl=DIFF.
IIN1	MC_EndTrigLine_IIN1	Isolated current loop input lines (four lines per camera). This value is applicable only when EndTrigCtl=ISO.
IIN2	MC_EndTrigLine_IIN2	Isolated current loop input lines (four lines per camera). This value is applicable only when EndTrigCtl=ISO.
IIN3	MC_EndTrigLine_IIN3	Isolated current loop input lines (four lines per camera). This value is applicable only when EndTrigCtl=ISO.
IIN4	MC_EndTrigLine_IIN4	Isolated current loop input lines (four lines per camera). This value is applicable only when EndTrigCtl=ISO.