I/O SCREW TERMINAL Connector

MIO Module offers 8 input/output lines:

four opto-isolated inputs, named Input n, with n = 1 to 4, and
four reed relay outputs, called Output n, with n = 1 to 4.

They are available on the on-board 16-position screw terminal, named I/O SCREW TERMINAL. They are natively supported by the MultiCam driver. Each input line is interrupt-capable, with independent edge sensitivity control. Its status is monitored by a dedicated LED.

MIO Module I/O lines

Alarm/Watchdog

Output 4 can be associated with a timer in order to be used as an alarm or a watchdog. The MODE jumper is used to select this functionality. The factory setting of the MODE jumper is open.

Function	MODE jumper
Alarm	open
Watchdog	shorted