Triggering Example 7
Armed multiple-phase
Area-scan, asynchronous reset
Without phase overlapping
This triggering modality is reached when the following combination of parameters is set:
MultiCam parameter |
Value |
FORBID |
|
HARD |
|
HARD |
|
MC_INDETERMINATE, >1 |
This example shows the way to grab several successive images from an asynchronously reset camera using an external frame trigger.
All trigger events (TE) are sourced by a hardware- or software-issued event. There is no substantial delay between the source and SAP events.
Use this triggering mode with TrigMode and NextTrigMode set to SOFT for software-controlled grabs if a tight timing is to be met.
Specify the number of images to be acquired in a row with the parameter SeqLength_Fr. To acquire an undefined number of images, set SeqLength_Fr to MC_INDETERMINATE. In this case, the sequence will be stopped by returning the MultiCam channel to the idle state.