Triggering Example 11
Armed sustained
Area-scan, asynchronous reset
Without phase overlapping
This triggering modality is reached when the following combination of parameters is set:
MultiCam parameter |
Value |
FORBID |
|
HARD |
|
REPEAT |
|
MC_INDETERMINATE, >1 |
This example shows the way to grab several successive images from an asynchronously reset camera using a single initial external frame trigger.
The trigger event (TE) is sourced by a hardware- or software-issued event. There is no substantial delay between the source and SAP events.
Each subsequent TE event is conceptually sourced by the end of the preceding acquisition phase.
Use this triggering mode with TrigMode set to SOFT for software-controlled grab if a tight timing is to be met.
Specify the number of images to be acquired in a row with the parameter SeqLength_Fr. To acquire an undefined number of images, set SeqLength_Fr to MC_INDETERMINATE. In this case, the sequence will be stopped by returning the MultiCam channel to the idle state.