Line Selection
Refer to I/O Operation for a description of the board capabilities.
MultiCam assigns automatically a nominal trigger/endtrigger input line. The user may override the choice by means of TrigLine and EndTrigLine respectively.
Possible values are depending on the selected value of TrigCtl/EndTrigCtl.
When TrigCtl/EndTrigCtl=ISO (Isolated inputs)
TrigLine |
Description |
NOM |
Select the nominal input (isolated input 2) |
IIN1 |
Select the isolated input 1 |
IIN2 |
Select the isolated input 2 |
IIN3 |
Select the isolated input 3 |
IIN4 |
Select the isolated input 4 |
When TrigCtl/EndTrigCtl=DIFF (Differential inputs)
TrigLine |
Description |
NOM |
Select the nominal input (differential input 2) |
DIN1 |
Select the differential input 1 |
DIN2 |
Select the differential input 2 |
The default value of TrigLine/EndTrigLine is NOM.