Triggering Example 4
Armed single-phase
Line-scan, page mode
With phase overlapping
This triggering modality is reached when the following combination of parameters is set:
MultiCam parameter |
Value |
Irrelevant |
|
HARD |
|
Irrelevant |
|
1 |
This example shows the way to grab the image of a discrete object through a line-scan camera using an external page trigger.
The trigger event (TE) is sourced by a hardware- or software-issued event. There is no substantial delay between the source and SWP events.
Use this triggering mode with TrigMode set to SOFT for software-controlled grab if a tight timing is to be met. The acquisition sequence has to be previously armed.
Set the PageDelay_Ln parameter to zero when the page delay is not necessary.