Multicam Parameters Notes
If you configured it as a Trigger Input, the electrical style of the I/O is defined by the value of TrigCtl.
- When value is set to ITTL, it is operated as an isolated digital input with 3 kΩ pull-up resistor.
- When value is set to I12V, it is operated as an isolated high-voltage digital input with 2 kΩ pull-down resistor.
If you configured it as a Line Trigger Input, the electrical style of the I/O is defined by the value of LineTrigCtl.
- When value is set to ITTL, it is operated as an isolated digital input with 3 kΩ pull-up resistor.
- When value is set to I12V, it is operated as an isolated high-voltage digital input with 2 kΩ pull-down resistor.
If you configured it as a Strobe Output, the electrical style of the I/O is defined by the value of StrobeCtl.
- When value is set to ITTL, it is operated as an isolated totem-pole digital output.
- When value is set to IOC, it is operated as an isolated open collector digital output with 3 kΩ pull-up resistor.
- When value is set to IOE, it is operated as an isolated open emitter digital output with 2 kΩ pull-down resistor.
If you configured it as a General Purpose Input, the electrical style of the I/O is defined by the value of InputStyle.
- When value is set to ITTL, it is operated as an isolated digital input with 3 kΩ pull-up resistor.
- When value is set to I12V, it is operated as an isolated high-voltage digital input with 2 kΩ pull-down resistor.
If you configured it as a General Purpose Output, the electrical style of the I/O is defined by the value of OutputStyle.
- When value is set to ITTL, it is operated as an isolated totem-pole digital output.
- When value is set to IOC, it is operated as an isolated open collector digital output with 3 kΩ pull-up resistor.
- When value is set to IOE, it is operated as an isolated open emitter digital output with 2 kΩ pull-down resistor.
Note. I12V stands for Isolated 12V. IOC stands for Isolated Open Collector. IOE stands for Isolated Open Emitter.